Geely Fault Code
Free · no signupP0562
Start-Stop Dead / Hybrid Fault Lamp
System
Electrical / 48V
Symptom
Start-Stop Dead / Hybrid Fault Lamp
Diagnosis & fix steps
LOGIC: 48V Mild-Hybrid DC/DC Converter System Voltage Low.
ACTION: Inspect low-voltage ground return stud on the 48V-to-12V bidirectional converter. Check 48V lithium-ion battery pack state of health (SOH) and load test main 12V AGM auxiliary battery.
Red Seal field insights
Dual-Voltage Loop: If the 12V lead-acid battery develops high internal resistance, the 48V DC/DC converter over-saturates trying to support cabin electrical loads, dropping the bus.
Same code keeps coming back?
That's a program problem, not a part problem. Book a 30-minute uptime review with Grant, a Red Seal Heavy Duty Technician.
Read before you touch anything
- This is general reference information, not a repair manual. It is for trained, qualified technicians.
- Fault codes, meanings and procedures vary by model, serial number and software version. Confirm the code and the procedure against the manufacturer's service manual before acting.
- Follow the OEM service manual, torque specs and your site's safety procedures: lockout/tagout, block raised equipment, relieve hydraulic, fuel and air pressure, and let hot systems cool.
- You use this information at your own risk. Adventure Mechanical and AM Fleet Integrity accept no liability for damage, injury, downtime or loss arising from its use.
- Not affiliated with or endorsed by any manufacturer. Brand names are used only to identify the equipment a code applies to.
Track this across your whole fleet
This code is free to read. AM Fleet Integrity lets your team log fault codes against assets, plus the full fault-code library, QR operator reporting, PM scheduling and predictive alerts. Start free — no credit card required.
Start your free trialRelated Geely fault codes
- P2610Intermittent Check Engine / No Drive Issue
- P050BStumble Immediately After Engine Starts
- P2714Harsh Shift 1-2 / Transmission Alert
- P0500Speedometer Drops to 0 / Transmission Limp
- P284AOdd or Even Gears Disengage Suddenly
- P0456EVAP Minor Leak / Check Engine Light
- U0100Steering Hard / Cluster Warning Lights
- P0420Check Engine Light / Clean Emissions Test
- P0341Extended Crank / Engine Rattles
- P0300Rough Idle / Flashing Check Engine