Takeuchi Fault Code
Free · no signupP0087
Limp Mode.
System
Not specified
Symptom
Limp Mode.
Diagnosis & fix steps
LOGIC: Fuel Rail Pressure Too Low.
ACTION: Replace primary and secondary fuel filters; check the electric lift pump for 5 PSI minimum.
Red Seal field insights
Red Seal Fix: These machines have a tiny "last chance" screen inside the inlet of the electric lift pump. If you change filters and the code stays, pull the inlet line off the pump and clean that screen.
Same code keeps coming back?
That's a program problem, not a part problem. Book a 30-minute uptime review with Grant, a Red Seal Heavy Duty Technician.
Read before you touch anything
- This is general reference information, not a repair manual. It is for trained, qualified technicians.
- Fault codes, meanings and procedures vary by model, serial number and software version. Confirm the code and the procedure against the manufacturer's service manual before acting.
- Follow the OEM service manual, torque specs and your site's safety procedures: lockout/tagout, block raised equipment, relieve hydraulic, fuel and air pressure, and let hot systems cool.
- You use this information at your own risk. Adventure Mechanical and AM Fleet Integrity accept no liability for damage, injury, downtime or loss arising from its use.
- Not affiliated with or endorsed by any manufacturer. Brand names are used only to identify the equipment a code applies to.
Track this across your whole fleet
This code is free to read. AM Fleet Integrity lets your team log fault codes against assets, plus the full fault-code library, QR operator reporting, PM scheduling and predictive alerts. Start free — no credit card required.
Start your free trial