Volkswagen Fault Code
Free · no signupService Light Indicator
System
Not specified
Symptom
Not specified
Diagnosis & fix steps
1. Press and hold the 0.0/SET button.
2. Turn ignition ON (don't start).
3. Release button, then press the Menu/Clock button once.
Red Seal field insights
If the vehicle has a touchscreen, go to Menu > Vehicle > Service. If "Reset" is grayed out, you must use a scan tool (OBD) because the car requires a "Flexible Service" adaptation.
Same code keeps coming back?
That's a program problem, not a part problem. Book a 30-minute uptime review with Grant, a Red Seal Heavy Duty Technician.
Read before you touch anything
- This is general reference information, not a repair manual. It is for trained, qualified technicians.
- Fault codes, meanings and procedures vary by model, serial number and software version. Confirm the code and the procedure against the manufacturer's service manual before acting.
- Follow the OEM service manual, torque specs and your site's safety procedures: lockout/tagout, block raised equipment, relieve hydraulic, fuel and air pressure, and let hot systems cool.
- You use this information at your own risk. Adventure Mechanical and AM Fleet Integrity accept no liability for damage, injury, downtime or loss arising from its use.
- Not affiliated with or endorsed by any manufacturer. Brand names are used only to identify the equipment a code applies to.
Track this across your whole fleet
This code is free to read. AM Fleet Integrity lets your team log fault codes against assets, plus the full fault-code library, QR operator reporting, PM scheduling and predictive alerts. Start free — no credit card required.
Start your free trial