Xe-Series Fault Code
Free · no signupE:0125
Sensor Fault; Temperature error.
System
Trip
Symptom
Sensor Fault; Temperature error.
Diagnosis & fix steps
Airend Discharge Temp Sensor (2ATT) Fault.
LOGIC: The thermistor signal is outside the -50°C to 250°C range.
Red Seal field insights
High-vibration areas often "pinch" this sensor wire. If it reads -50°C, the wire is broken; if it reads 250°C, the wire is shorted to the frame.
Same code keeps coming back?
That's a program problem, not a part problem. Book a 30-minute uptime review with Grant, a Red Seal Heavy Duty Technician.
Read before you touch anything
- This is general reference information, not a repair manual. It is for trained, qualified technicians.
- Fault codes, meanings and procedures vary by model, serial number and software version. Confirm the code and the procedure against the manufacturer's service manual before acting.
- Follow the OEM service manual, torque specs and your site's safety procedures: lockout/tagout, block raised equipment, relieve hydraulic, fuel and air pressure, and let hot systems cool.
- You use this information at your own risk. Adventure Mechanical and AM Fleet Integrity accept no liability for damage, injury, downtime or loss arising from its use.
- Not affiliated with or endorsed by any manufacturer. Brand names are used only to identify the equipment a code applies to.
Track this across your whole fleet
This code is free to read. AM Fleet Integrity lets your team log fault codes against assets, plus the full fault-code library, QR operator reporting, PM scheduling and predictive alerts. Start free — no credit card required.
Start your free trialRelated Xe-Series fault codes
- E:0129Shutdown on High Temp.
- E:0119Shutdown on High Pressure.
- E:0866Controller goes black or reboots.
- E:0115Sensor Fault; Machine will not start.
- E:0010Machine stops instantly; Emergency Stop symbol flashes.
- A:5420Communication Error.
- A:4805Air Filter Service.
- A:4804Service Due.
- A:2121Low Sump Pressure.
- A:2119High Package Temp.