Cummins Fault Code
Free · no signupCummins 351 (3597-12)
Engine Stumbles / Dies.
System
Power
Symptom
Engine Stumbles / Dies.
Diagnosis & fix steps
LOGIC: Injector Power Supply - Bad Device.
ACTION: Check the internal ECM power supply. Disconnect injector banks one by one to see if the code clears.
Red Seal field insights
PRO-TIP: A shorted injector solenoid can "pull down" the whole ECM power rail. Find the "shorted" injector to save the ECM.
Same code keeps coming back?
That's a program problem, not a part problem. Book a 30-minute uptime review with Grant, a Red Seal Heavy Duty Technician.
Read before you touch anything
- This is general reference information, not a repair manual. It is for trained, qualified technicians.
- Fault codes, meanings and procedures vary by model, serial number and software version. Confirm the code and the procedure against the manufacturer's service manual before acting.
- Follow the OEM service manual, torque specs and your site's safety procedures: lockout/tagout, block raised equipment, relieve hydraulic, fuel and air pressure, and let hot systems cool.
- You use this information at your own risk. Adventure Mechanical and AM Fleet Integrity accept no liability for damage, injury, downtime or loss arising from its use.
- Not affiliated with or endorsed by any manufacturer. Brand names are used only to identify the equipment a code applies to.
Track this across your whole fleet
This code is free to read. AM Fleet Integrity lets your team log fault codes against assets, plus the full fault-code library, QR operator reporting, PM scheduling and predictive alerts. Start free — no credit card required.
Start your free trialRelated Cummins fault codes
- Cummins 3712 (SPN:5246 / FMI:0)Final Derate / 5 MPH Limit.
- Cummins 3382 (SPN:100 / FMI:2)Engine Derate / Warning Light
- Cummins 6254 (SPN:6254 / FMI:9)Limp Mode / Engine Derate.
- Cummins 221Engine Derate / Active CEL
- FC 1922Filter light flashes. If ignored, engine will severely derate and eventually "Lock Out."
- Cummins 144 (SPN 110 FMI 4)Fan stays on 100%; Gauge pinned to Hot; Hard starting in cold weather; Engine derate.
- FC 234Engine speed has exceeded the safety threshold. Possible fuel system fault.
- Cummins 119 (SPN 135 FMI 4)Low oil pressure alarm; 0 PSI on gauge; Engine may shutdown automatically.
- FC 441ECM may lose communication; engine stumbles or display flickers.
- Cummins 118 (SPN 157 FMI 3)Loud engine knock; Severe power loss (Limp Mode); Check Engine Light.