Generic Fault Code
Free · no signupP0370
Engine Cranks Long / Stumbles
System
Ignition
Symptom
Engine Cranks Long / Stumbles
Diagnosis & fix steps
LOGIC: Timing Reference High Resolution Signal A Malfunction.
ACTION: Check high-resolution optical or magnetic encoder sensor wiring. Clean sensor lens/wheel of metal shavings or oil.
Red Seal field insights
Circuit Fail: The PCM detects a structural error or total signal drop from the high-resolution timing track encoder.
Same code keeps coming back?
That's a program problem, not a part problem. Book a 30-minute uptime review with Grant, a Red Seal Heavy Duty Technician.
Read before you touch anything
- This is general reference information, not a repair manual. It is for trained, qualified technicians.
- Fault codes, meanings and procedures vary by model, serial number and software version. Confirm the code and the procedure against the manufacturer's service manual before acting.
- Follow the OEM service manual, torque specs and your site's safety procedures: lockout/tagout, block raised equipment, relieve hydraulic, fuel and air pressure, and let hot systems cool.
- You use this information at your own risk. Adventure Mechanical and AM Fleet Integrity accept no liability for damage, injury, downtime or loss arising from its use.
- Not affiliated with or endorsed by any manufacturer. Brand names are used only to identify the equipment a code applies to.
Track this across your whole fleet
This code is free to read. AM Fleet Integrity lets your team log fault codes against assets, plus the full fault-code library, QR operator reporting, PM scheduling and predictive alerts. Start free — no credit card required.
Start your free trialRelated Generic fault codes
- P0371Engine Misfires / Errant RPM Spikes
- P0362Dead Misfire Cylinder 12
- P0372Engine Hesitates / Shuts Down
- P0361Dead Misfire Cylinder 11
- P0373Engine Bucking / Sudden Spark Drops
- P0360Dead Misfire Cylinder 10
- P0374Engine Refuses to Start / No Spark
- P0359Dead Misfire Cylinder 9
- P0375Extended Crank / Limp Mode Warning
- P0358Dead Misfire Cylinder 8