LGCM Fault Code

Free · no signup

E11 / SPN 157 FMI 04

Engine Limp / Severe Lack of Power

System

Fuel / HPCR

Symptom

Engine Limp / Severe Lack of Power

Diagnosis & fix steps

LOGIC: Common Rail Pressure Sensor Signal Voltage Low (Grounded). ACTION: Disconnect sensor harness at fuel rail. Check signal wire resistance to ground (must be infinite Ω); verify 5V reference and ground return from the ECU.

Red Seal field insights

Harness Rub-Through: Engine vibrations shake the unclipped engine harness against the raw intake manifold edge, grinding through the rail pressure signal wire insulation.

Same code keeps coming back?

That's a program problem, not a part problem. Book a 30-minute uptime review with Grant, a Red Seal Heavy Duty Technician.

Book an uptime review

Read before you touch anything

  • This is general reference information, not a repair manual. It is for trained, qualified technicians.
  • Fault codes, meanings and procedures vary by model, serial number and software version. Confirm the code and the procedure against the manufacturer's service manual before acting.
  • Follow the OEM service manual, torque specs and your site's safety procedures: lockout/tagout, block raised equipment, relieve hydraulic, fuel and air pressure, and let hot systems cool.
  • You use this information at your own risk. Adventure Mechanical and AM Fleet Integrity accept no liability for damage, injury, downtime or loss arising from its use.
  • Not affiliated with or endorsed by any manufacturer. Brand names are used only to identify the equipment a code applies to.

Track this across your whole fleet

This code is free to read. AM Fleet Integrity lets your team log fault codes against assets, plus the full fault-code library, QR operator reporting, PM scheduling and predictive alerts. Start free — no credit card required.

Start your free trial

Related LGCM fault codes

← All LGCM fault codes