Case Fault Code

Free · no signup

A010

Function Loss.

Variant 1

System

Not specified

Symptom

Function Loss.

Diagnosis & fix steps

LOGIC: MC (Main Controller) internal memory error. ACTION: Perform a "Hard Reset" (Battery Disconnect for 30s); check for 24V supply at the MC fuses.

Red Seal field insights

Red Seal Fix: This is often a software glitch caused by jump-starting with 24V boost packs. If a reset doesn't work, the MC may need a firmware re-flash from the dealer.

Variant 2

System

Not specified

Symptom

Engine Stalls.

Diagnosis & fix steps

LOGIC: Engine Speed Sensor (Crank) signal lost. ACTION: Check the sensor gap at the flywheel; inspect the harness for frame-rub near the starter.

Red Seal field insights

Red Seal Fix: These small machines vibrate heavily. The sensor mounting bracket often vibrates loose. Ensure it's torqued and set the gap to 0.8mm.

Same code keeps coming back?

That's a program problem, not a part problem. Book a 30-minute uptime review with Grant, a Red Seal Heavy Duty Technician.

Book an uptime review

Read before you touch anything

  • This is general reference information, not a repair manual. It is for trained, qualified technicians.
  • Fault codes, meanings and procedures vary by model, serial number and software version. Confirm the code and the procedure against the manufacturer's service manual before acting.
  • Follow the OEM service manual, torque specs and your site's safety procedures: lockout/tagout, block raised equipment, relieve hydraulic, fuel and air pressure, and let hot systems cool.
  • You use this information at your own risk. Adventure Mechanical and AM Fleet Integrity accept no liability for damage, injury, downtime or loss arising from its use.
  • Not affiliated with or endorsed by any manufacturer. Brand names are used only to identify the equipment a code applies to.

Track this across your whole fleet

This code is free to read. AM Fleet Integrity lets your team log fault codes against assets, plus the full fault-code library, QR operator reporting, PM scheduling and predictive alerts. Start free — no credit card required.

Start your free trial

Related Case fault codes