Deutz Fault Code

Free · no signup

Code 6-1-1 / SPN 651 FMI 5

Dead Misfire Cylinder 1 / Engine Shake

System

Fuel System

Symptom

Dead Misfire Cylinder 1 / Engine Shake

Diagnosis & fix steps

LOGIC: Unit Pump / Injector Solenoid Cylinder 1 Open Circuit. ACTION: Measure Cylinder 1 unit pump solenoid coil resistance (~0.5–1.2Ω spec). Inspect harness leads and pass-through connector pins at the pump housing.

Red Seal field insights

Current Loop: Zero current flow detected across Cylinder 1 driver line indicates a broken wire filament, loose connector, or open solenoid coil.

Same code keeps coming back?

That's a program problem, not a part problem. Book a 30-minute uptime review with Grant, a Red Seal Heavy Duty Technician.

Book an uptime review

Read before you touch anything

  • This is general reference information, not a repair manual. It is for trained, qualified technicians.
  • Fault codes, meanings and procedures vary by model, serial number and software version. Confirm the code and the procedure against the manufacturer's service manual before acting.
  • Follow the OEM service manual, torque specs and your site's safety procedures: lockout/tagout, block raised equipment, relieve hydraulic, fuel and air pressure, and let hot systems cool.
  • You use this information at your own risk. Adventure Mechanical and AM Fleet Integrity accept no liability for damage, injury, downtime or loss arising from its use.
  • Not affiliated with or endorsed by any manufacturer. Brand names are used only to identify the equipment a code applies to.

Track this across your whole fleet

This code is free to read. AM Fleet Integrity lets your team log fault codes against assets, plus the full fault-code library, QR operator reporting, PM scheduling and predictive alerts. Start free — no credit card required.

Start your free trial

Related Deutz fault codes

← All Deutz fault codes