LGCM Fault Code

Free · no signup

E04 / SPN 168 FMI 00

Blown Bulbs / Gauge Cluster Reboots

System

Electrical / Charging

Symptom

Blown Bulbs / Gauge Cluster Reboots

Diagnosis & fix steps

LOGIC: System Charging Voltage Above Limit (>16.0V). ACTION: Measure alternator output voltage across battery terminals with engine revved to high idle. Inspect alternator internal voltage regulator ground; replace single-wire or internally regulated alternator.

Red Seal field insights

Regulator Runaway: Low-tier alternators mounted close to vibrating engine blocks suffer internal diode breakdown, causing uncontrolled 17V+ voltage spikes that fry dashboard electronics.

Same code keeps coming back?

That's a program problem, not a part problem. Book a 30-minute uptime review with Grant, a Red Seal Heavy Duty Technician.

Book an uptime review

Read before you touch anything

  • This is general reference information, not a repair manual. It is for trained, qualified technicians.
  • Fault codes, meanings and procedures vary by model, serial number and software version. Confirm the code and the procedure against the manufacturer's service manual before acting.
  • Follow the OEM service manual, torque specs and your site's safety procedures: lockout/tagout, block raised equipment, relieve hydraulic, fuel and air pressure, and let hot systems cool.
  • You use this information at your own risk. Adventure Mechanical and AM Fleet Integrity accept no liability for damage, injury, downtime or loss arising from its use.
  • Not affiliated with or endorsed by any manufacturer. Brand names are used only to identify the equipment a code applies to.

Track this across your whole fleet

This code is free to read. AM Fleet Integrity lets your team log fault codes against assets, plus the full fault-code library, QR operator reporting, PM scheduling and predictive alerts. Start free — no credit card required.

Start your free trial

Related LGCM fault codes

← All LGCM fault codes