RAM Fault Code
Free · no signupP0471
Exhaust brake feels weak; Poor fuel economy; Turbo lag.
System
Not specified
Symptom
Exhaust brake feels weak; Poor fuel economy; Turbo lag.
Diagnosis & fix steps
Exhaust Pressure Sensor Range/Performance.
LOGIC: The Exhaust Backpressure (EBP) sensor reading doesn't match the Boost/Baro sensors at key-on.
ACTION: 1. Locate the EBP sensor (on the thermostat housing area).
2. Remove the metal tube leading to the exhaust manifold.
FIX: Clean soot from the EBP sensor tube; replace EBP sensor.
Red Seal field insights
The small metal tube that connects the sensor to the exhaust manifold gets 100% plugged with soot. If the tube is blocked, the sensor is "blind" to actual pressure.
Same code keeps coming back?
That's a program problem, not a part problem. Book a 30-minute uptime review with Grant, a Red Seal Heavy Duty Technician.
Read before you touch anything
- This is general reference information, not a repair manual. It is for trained, qualified technicians.
- Fault codes, meanings and procedures vary by model, serial number and software version. Confirm the code and the procedure against the manufacturer's service manual before acting.
- Follow the OEM service manual, torque specs and your site's safety procedures: lockout/tagout, block raised equipment, relieve hydraulic, fuel and air pressure, and let hot systems cool.
- You use this information at your own risk. Adventure Mechanical and AM Fleet Integrity accept no liability for damage, injury, downtime or loss arising from its use.
- Not affiliated with or endorsed by any manufacturer. Brand names are used only to identify the equipment a code applies to.
Track this across your whole fleet
This code is free to read. AM Fleet Integrity lets your team log fault codes against assets, plus the full fault-code library, QR operator reporting, PM scheduling and predictive alerts. Start free — no credit card required.
Start your free trialRelated RAM fault codes
- P0507Engine idles higher than normal (900+ RPM); Hissing sound from engine bay.
- P0401Rough idle; EGR "Service" message; High intake temps.
- P0713Delayed Cold Shifts / Check Trans Message
- P020FEngine "stumble" or miss; Knocking sound under load; Increased exhaust smoke; CEL on.
- P0730Trans Temp Warning / Limp Mode (4th Gear)
- P0191Erratic idle; Engine "clatter"; Sudden stalling.
- P0734Slip Under Heavy Towing / Limp to 3rd
- P0087Engine bogs under load; "Fuel Filter Low Pressure" warning; Stalling.
- P0744TCC Shudder / High Operating Temperature
- Manual ResetSplit temps (Hot/Cold); Air stuck on defrost or floor; No response to temp changes.