RAM Fault Code
Free · no signupP0507
Engine idles higher than normal (900+ RPM); Hissing sound from engine bay.
System
Not specified
Symptom
Engine idles higher than normal (900+ RPM); Hissing sound from engine bay.
Diagnosis & fix steps
Idle Control System RPM Higher Than Expected.
LOGIC: The ECM cannot pull the idle down to the target RPM despite commanding the throttle and fueling down.
ACTION: 1. Check for vacuum/intake leaks after the throttle body.
2. Inspect the Intake Throttle Body for carbon sticking.
FIX: Clean Intake Throttle Body; repair intake plenum leaks.
Red Seal field insights
On the 6.7L, the CCV (Crankcase Ventilation) filter can get full and oily, causing oil to coat the intake throttle. If the throttle butterfly can't close fully, the idle stays high.
Same code keeps coming back?
That's a program problem, not a part problem. Book a 30-minute uptime review with Grant, a Red Seal Heavy Duty Technician.
Read before you touch anything
- This is general reference information, not a repair manual. It is for trained, qualified technicians.
- Fault codes, meanings and procedures vary by model, serial number and software version. Confirm the code and the procedure against the manufacturer's service manual before acting.
- Follow the OEM service manual, torque specs and your site's safety procedures: lockout/tagout, block raised equipment, relieve hydraulic, fuel and air pressure, and let hot systems cool.
- You use this information at your own risk. Adventure Mechanical and AM Fleet Integrity accept no liability for damage, injury, downtime or loss arising from its use.
- Not affiliated with or endorsed by any manufacturer. Brand names are used only to identify the equipment a code applies to.
Track this across your whole fleet
This code is free to read. AM Fleet Integrity lets your team log fault codes against assets, plus the full fault-code library, QR operator reporting, PM scheduling and predictive alerts. Start free — no credit card required.
Start your free trialRelated RAM fault codes
- P0713Delayed Cold Shifts / Check Trans Message
- P0471Exhaust brake feels weak; Poor fuel economy; Turbo lag.
- P0730Trans Temp Warning / Limp Mode (4th Gear)
- P0401Rough idle; EGR "Service" message; High intake temps.
- P0734Slip Under Heavy Towing / Limp to 3rd
- P020FEngine "stumble" or miss; Knocking sound under load; Increased exhaust smoke; CEL on.
- P0744TCC Shudder / High Operating Temperature
- P0191Erratic idle; Engine "clatter"; Sudden stalling.
- P0751Missing 1st & 4th Gears / Long Shift Flare
- P0087Engine bogs under load; "Fuel Filter Low Pressure" warning; Stalling.