RAM Fault Code

Free · no signup

P226C

Slow boost response; Excessive black smoke on acceleration.

System

Not specified

Symptom

Slow boost response; Excessive black smoke on acceleration.

Diagnosis & fix steps

Turbocharger Vane Position "Slow Response". LOGIC: The VGT vanes are moving, but too slowly, usually due to carbon "coking" in the turbo housing. ACTION: 1. Check VGT actuator for full travel. 2. Inspect for exhaust leaks at the manifold (warped manifold). FIX: Clean/Replace Turbocharger; replace warped exhaust manifold.

Red Seal field insights

The 6.7L exhaust manifold is notorious for shrinking/warping, which can put stress on the turbo housing and cause the internal vanes to bind.

Same code keeps coming back?

That's a program problem, not a part problem. Book a 30-minute uptime review with Grant, a Red Seal Heavy Duty Technician.

Book an uptime review

Read before you touch anything

  • This is general reference information, not a repair manual. It is for trained, qualified technicians.
  • Fault codes, meanings and procedures vary by model, serial number and software version. Confirm the code and the procedure against the manufacturer's service manual before acting.
  • Follow the OEM service manual, torque specs and your site's safety procedures: lockout/tagout, block raised equipment, relieve hydraulic, fuel and air pressure, and let hot systems cool.
  • You use this information at your own risk. Adventure Mechanical and AM Fleet Integrity accept no liability for damage, injury, downtime or loss arising from its use.
  • Not affiliated with or endorsed by any manufacturer. Brand names are used only to identify the equipment a code applies to.

Track this across your whole fleet

This code is free to read. AM Fleet Integrity lets your team log fault codes against assets, plus the full fault-code library, QR operator reporting, PM scheduling and predictive alerts. Start free — no credit card required.

Start your free trial

Related RAM fault codes

← All RAM fault codes