Toyota Fault Code
Free · no signupP2458
Frequent DPF warning; Engine derate; Fuel smell in oil.
System
Not specified
Symptom
Frequent DPF warning; Engine derate; Fuel smell in oil.
Diagnosis & fix steps
DPF Regeneration Duration Error.
LOGIC: The DPF cleaning cycle is taking too long to complete (Soot won't burn off).
ACTION: 1. Check the "5th Injector" (Exhaust Fuel Addition Valve) for clogging.
2. Check differential pressure sensor hoses.
FIX: Clean or replace the 5th Injector; perform a forced regeneration.
Red Seal field insights
The 5th injector in the exhaust is famous for carboning up. If it's blocked, no fuel gets to the DPF to burn the soot, and the regen will fail every time.
Same code keeps coming back?
That's a program problem, not a part problem. Book a 30-minute uptime review with Grant, a Red Seal Heavy Duty Technician.
Read before you touch anything
- This is general reference information, not a repair manual. It is for trained, qualified technicians.
- Fault codes, meanings and procedures vary by model, serial number and software version. Confirm the code and the procedure against the manufacturer's service manual before acting.
- Follow the OEM service manual, torque specs and your site's safety procedures: lockout/tagout, block raised equipment, relieve hydraulic, fuel and air pressure, and let hot systems cool.
- You use this information at your own risk. Adventure Mechanical and AM Fleet Integrity accept no liability for damage, injury, downtime or loss arising from its use.
- Not affiliated with or endorsed by any manufacturer. Brand names are used only to identify the equipment a code applies to.
Track this across your whole fleet
This code is free to read. AM Fleet Integrity lets your team log fault codes against assets, plus the full fault-code library, QR operator reporting, PM scheduling and predictive alerts. Start free — no credit card required.
Start your free trialRelated Toyota fault codes
- P2463DPF Warning Lamp / Limp Mode Active
- P244BDPF Full Warning / High Fuel Consumption
- P24AFDPF Warning / Limp Mode
- P1604Engine Cranks Long / Intermittent Stall
- P2588Turbo surging; Flat spots in acceleration; VNT actuator buzzing.
- Service Light Indicator
- P1601Check engine light; No driveability symptoms but code won't clear.
- U0121ABS/VSC Lights On
- P1415 / P1416Hard starting in heat; Loss of power.
- P1349Rough idle; Engine stalling at stoplights; Poor MPG.