Toyota Fault Code
Free · no signupP2588
Turbo surging; Flat spots in acceleration; VNT actuator buzzing.
System
Not specified
Symptom
Turbo surging; Flat spots in acceleration; VNT actuator buzzing.
Diagnosis & fix steps
Turbocharger Vane Position Sensor Circuit Low.
LOGIC: The ECM detects that the turbo vanes are not reaching their "Home" position.
ACTION: 1. Inspect the 3-pin position sensor on the turbo.
2. Check for carbon buildup in the turbine housing.
FIX: Replace Vane Position Sensor or clean/replace Turbocharger.
Red Seal field insights
These sensors are exposed to extreme heat. If the code is intermittent, check the heat shield. If the shield is missing, the sensor is likely "cooking" and failing internally.
Same code keeps coming back?
That's a program problem, not a part problem. Book a 30-minute uptime review with Grant, a Red Seal Heavy Duty Technician.
Read before you touch anything
- This is general reference information, not a repair manual. It is for trained, qualified technicians.
- Fault codes, meanings and procedures vary by model, serial number and software version. Confirm the code and the procedure against the manufacturer's service manual before acting.
- Follow the OEM service manual, torque specs and your site's safety procedures: lockout/tagout, block raised equipment, relieve hydraulic, fuel and air pressure, and let hot systems cool.
- You use this information at your own risk. Adventure Mechanical and AM Fleet Integrity accept no liability for damage, injury, downtime or loss arising from its use.
- Not affiliated with or endorsed by any manufacturer. Brand names are used only to identify the equipment a code applies to.
Track this across your whole fleet
This code is free to read. AM Fleet Integrity lets your team log fault codes against assets, plus the full fault-code library, QR operator reporting, PM scheduling and predictive alerts. Start free — no credit card required.
Start your free trialRelated Toyota fault codes
- Service Light Indicator
- P24AFDPF Warning / Limp Mode
- U0121ABS/VSC Lights On
- P2463DPF Warning Lamp / Limp Mode Active
- P2458Frequent DPF warning; Engine derate; Fuel smell in oil.
- P244BDPF Full Warning / High Fuel Consumption
- P1604Engine Cranks Long / Starts and Dies
- P1601Check engine light; No driveability symptoms but code won't clear.
- P1415 / P1416Hard starting in heat; Loss of power.
- P1349Rough idle; Engine stalling at stoplights; Poor MPG.