Ford Fault Code

Free · no signup

P0299

Low Boost / Lack of Power

Variant 1

System

Turbo

Symptom

Low Boost / Lack of Power

Diagnosis & fix steps

LOGIC: Turbocharger Underboost condition. ACTION: Check for "boot" cracks in the charge air cooler or a sticking VGT unison ring.

Red Seal field insights

Physics: The actual boost pressure is significantly lower than what the ECM is commanding.

Variant 2

System

Air Intake

Symptom

Underboost / Sluggish Throttle Response

Diagnosis & fix steps

LOGIC: Turbocharger Boost Pressure Below Target Range. ACTION: Smoke test hot-side charge air cooler pipes and intercooler core. Inspect vacuum lines controlling the VGT actuator solenoid; verify actuator arm travels freely.

Red Seal field insights

Intercooler Cracking: High boost combined with engine vibration splits the plastic crimped end tanks on the charge air cooler, causing pressure decay under load.

Variant 3

System

Air Intake

Symptom

Low Power / Turbo Whistle Under Load

Diagnosis & fix steps

LOGIC: Turbocharger Underboost Condition. ACTION: Inspect the flexible rubber hot-side boost hose right off the turbo outlet for splits along the bottom bend. Verify electronic VGT actuator sweeps smoothly during key-on self test.

Red Seal field insights

Split Hose Physics: Oil contamination softening the bottom of the silicone/rubber turbo outlet boot causes it to balloon and burst under sustained high-boost highway hauling.

Same code keeps coming back?

That's a program problem, not a part problem. Book a 30-minute uptime review with Grant, a Red Seal Heavy Duty Technician.

Book an uptime review

Read before you touch anything

  • This is general reference information, not a repair manual. It is for trained, qualified technicians.
  • Fault codes, meanings and procedures vary by model, serial number and software version. Confirm the code and the procedure against the manufacturer's service manual before acting.
  • Follow the OEM service manual, torque specs and your site's safety procedures: lockout/tagout, block raised equipment, relieve hydraulic, fuel and air pressure, and let hot systems cool.
  • You use this information at your own risk. Adventure Mechanical and AM Fleet Integrity accept no liability for damage, injury, downtime or loss arising from its use.
  • Not affiliated with or endorsed by any manufacturer. Brand names are used only to identify the equipment a code applies to.

Track this across your whole fleet

This code is free to read. AM Fleet Integrity lets your team log fault codes against assets, plus the full fault-code library, QR operator reporting, PM scheduling and predictive alerts. Start free — no credit card required.

Start your free trial

Related Ford fault codes