Question 1

What does Xe-Series fault code A:2111 mean?

Accepted Answer

A:2111 (Warning): High Discharge Pressure. Fix: LOGIC: The system pressure is within 5 PSI of the maximum trip limit.

Question 2

What does Xe-Series fault code A:4805 mean?

Accepted Answer

A:4805 (Warning): Air Filter Service. Fix: LOGIC: The pressure drop across the intake filter is too high.

Question 3

What does Xe-Series fault code E:0010 mean?

Accepted Answer

E:0010 (Trip): Machine stops instantly; Emergency Stop symbol flashes. Fix: Emergency Stop circuit open.

LOGIC: No voltage (24V) detected on terminal R1C.

Question 4

What does Xe-Series fault code E:0115 mean?

Accepted Answer

E:0115 (Trip): Sensor Fault; Machine will not start. Fix: Pressure Sensor Signal Out of Range.

LOGIC: 4-20mA signal is below 3.8mA or above 20.8mA.

Question 5

What does Xe-Series fault code E:0119 mean?

Accepted Answer

E:0119 (Trip): Shutdown on High Pressure. Fix: Excess Discharge Pressure.

LOGIC: The package pressure exceeded the "Max Trip" setpoint (usually 110% of rated PSI).

Question 6

What does Xe-Series fault code E:0125 mean?

Accepted Answer

E:0125 (Trip): Sensor Fault; Temperature error. Fix: Airend Discharge Temp Sensor (2ATT) Fault.

LOGIC: The thermistor signal is outside the -50°C to 250°C range.

Question 7

What does Xe-Series fault code E:0129 mean?

Accepted Answer

E:0129 (Trip): Shutdown on High Temp. Fix: Excess Temperature (Overheat).

LOGIC: Temperature exceeded the trip limit (default 109°C / 228°F).

Question 8

What does Xe-Series fault code E:0866 mean?

Accepted Answer

E:0866 (Trip): Controller goes black or reboots. Fix: 24V DC Logic Power Low.

LOGIC: The internal DC power supply dropped below the operating threshold.

Xe-Series Fault Codes

Code	System	Symptom	Full fix
A:2111	Warning	High Discharge Pressure.	View fix
A:4805	Warning	Air Filter Service.	View fix
E:0010	Trip	Machine stops instantly; Emergency Stop symbol flashes.	View fix
E:0115	Trip	Sensor Fault; Machine will not start.	View fix
E:0119	Trip	Shutdown on High Pressure.	View fix
E:0125	Trip	Sensor Fault; Temperature error.	View fix
E:0129	Trip	Shutdown on High Temp.	View fix
E:0866	Trip	Controller goes black or reboots.	View fix